Table of Contents
Advertisement
Chapter 5
Install the UltraGlide Sensors
Boom Sensor Mounting Locations
Sensor mounting locations may be influenced by the boom configuration. If an object enters the sensor's blind
range unexpectedly, a false echo return to the sensor could occur, causing the boom to drop and the sensor or
boom to be damaged. To ensure optimal operation of the UltraGlide system and to protect the sprayer boom,
the sensors should be mounted on the front side of the boom, 8 - 10" above the lowest hanging part of the
boom.
Illustration of Sensor's Blind Range
FIGURE 10.
Mount the Boom Sensors
Mounted Boom Sensor
FIGURE 11.
60
WARNING
The machine must remain stationary and
switched off, with the booms unfolded and
supported, during installation or maintenance.
Willmar Eagle 8500 AutoBoom Installation Manual
Advertisement
Table of Contents
