Motor Self-Tuning - gefran ADP200 Quick Start Up Manual, Specification And Installation

8.2.8 Motor self-tuning

From Startup wizard Run Autotune still to enable motor self-tuning.
The following warning messages are displayed at the start and end of Self-tuning:
Operations displayed on the optional keypad
When the self-tuning procedure is executed its progress is displayed. In this phase the first digit on the right indicates
the progress of the procedure by rotating the external segments of the display.
If an error occurs, the word Er is displayed with the error code. Press Prg to exit the error.
Note !
For further information see chapter "9.2 Startup wizard for brushless motors (with the optional keypad)
Close Enable input
Open Enable input
ADP200 • Quick installation guide - Specifications and connection
Operations displayed on the integrated keypad
C EN
O EN
53