Table of Contents
Advertisement
MDP Based Key Phrase Detection Demonstration
User Guide
3. MDP Board Setup
Before running the demo, the MDP board must be configured by setting the switches and jumpers as shown in
Figure
3.1.
Note:
Figure 3.1
is a default image of the MDP board and the switch/jumper configurations shown here are wrong. The
orange rectangles are provided only to help you locate the correct locations of the switches/jumpers. Be sure to read
the information in
Table 3.1
for the correct configuration settings.
Figure 3.1. MDP Board with Configuration Locations Highlighted
© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are
trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02048-1.0
5
Advertisement
Table of Contents
