Table of Contents
Advertisement
MDP Based Key Phrase Detection Demonstration
User Guide
Start Address (Hex): 0x00000000
End Address (Hex): 0x00020000
d. Click OK.
8.
In the main interface, click Program Device to program the bitstream file Phrase_Detection_Bitstream.bin.
9.
To program the filter bank coefficient file, select the options below as shown in
a.
Under Programming Options, select the binary file FilterBank.bin in Programming file
b. Click Load from File to update the Data file size (Bytes) value. The default data file size does NOT default to
8192. Manually change the value to 8192.
c.
Ensure that the following addresses are correct:
Start Address (Hex): 0x00020000
End Address (Hex): 0x00030000
d. Click OK.
© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are
8
Figure 4.2. Bitstream File Settings
trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
Figure 4.3.
FPGA-UG-02048-1.0
Advertisement
Table of Contents
