Table of Contents
Advertisement
5. Running the Key Phrase Detection Demo
To run the basic demo and observe results on the board:
1.
Power ON the MDP board.
2.
Say the word Seven over the microphone.
3.
When the phrase is detected, LED D11 turns ON. If the phrase is not detected, LED D11 remains OFF.
4.
(Optional) In order to enable the RBG LED (D13), connect:
J30 pin 18 to J32 pin 9
J30 pin 19 to J32 pin 11
J30 pin 21 to J32 pin 13
J26 pin 3 to 4
Refer to
Figure 5.1
for the location of LED D11. The microphone is located at the back of the MDP board.
© 2018 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at www.latticesemi.com/legal. All other brand or product names are
trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02048-1.0
MDP Based Key Phrase Detection Demonstration
Figure 5.1. LED Location
User Guide
11
Advertisement
Table of Contents
