System Startup Using As-I Control Tools - Pepperl+Fuchs AS-I 3.0 PROFIBUS Manual

AS-i 3.0 PROFIBUS Gateway in Stainless Steel

System startup using AS-i Control Tools

11. System startup using AS-i Control Tools
The Windows based software AS-i Control Tools enables an easy and clear con-
figuration of the AS-i network.
Information!
AS-i Control Tools must be installed first!
This way, the device driver is copied into the previous designed folder in AS-i Control
Tools and should be recognized automatically.
Information!
To operate the software you need to pay for registration!
Connection Setup
!
Connect the device to the PC via its serial interface and the diagnostic inter-
face.
!
Start AS-i Control Tools.
!
Select: l Master | New.
57