Ethernet Diagnostics Interface With Web Server; Transitionless Operating Mode Changes - Pepperl+Fuchs AS-I 3.0 PROFIBUS Manual

AS-i 3.0 PROFIBUS Gateway in Stainless Steel
Advanced Diagnostics for AS-i Masters
9.5.7

Ethernet diagnostics interface with web server

These devices allow diagnostics for both the Gateway and the AS-i networks (in-
cluding Safety technology) over Ethernet without additional software. AS-i net-
work can be thus a part of a remote maintenance concept. Morover the configura-
tion file are stored on the web server and so they are always within reach.
9.5.8

Transitionless operating mode changes

Main menu || SETUP || MODE CHANGE ||
These devices are able to change the operating mode from projecting mode to
the protected operating mode without having to first go to the "offline phase".
This means the Slave outputs are not cleared and the safe Slaves not turned off.
Activation and deactivation is set using the PROFIBUS start parameterization.
This function must be explicitly activated; the default setting is "Deactivated."
The setting for activated and deactivated is saved, which means that it remains
set after a "power cycle".
40
AS-i Power
AS-i PWR Supply
change
Mode Change
Offline Phase
yes
change