Configuration Dp/V0 (Cyclic Data); 10.1.2.1 Options - Pepperl+Fuchs AS-I 3.0 PROFIBUS Manual

AS-i 3.0 PROFIBUS Gateway in Stainless Steel
PROFIBUS DP
If a double master is being used, the User-Diagnosis-Bytes 5 to 30 represent
AS-i network 1 and the User-diagnosis bytes 31 to 48 represent AS-i network 2.
10.1.2

Configuration DP/V0 (cyclic data)

The configuration of the AS-i/PROFIBUS gateways is made with the GSD file.
Therefore the provided GSD file has to be imported into your PROFIBUS configu-
ration tool.

10.1.2.1 Options

The original data input and outlet data can be used with different „Special IDs".
The advantages of special input and output IDs are, that they can include up to 64
elements (bytes or words), and that the length of input and output data can be dif-
ferent. Additionally, "manufacturer specific" data bytes describing the ID type are
possible. These "manufacturer specific" data bytes describe the which type ID is.
The GSD file offers here several combinations (several lengths) for transmitting
I/O date, command interface (management) and analog data.
Therefore the analog data can be transmitted directly in the process data channel
and do not have to be requested by the slower DP/V1 commands.
Maximally 8 modules can be configurated.
Information!
There are some controls, with which slot numbers (1-n) required for generating of new
modules are not generated automatically, but must be added manually!
The detailed possibilities:
Length
4 bytes
8 bytes
12 bytes
16 bytes
20 bytes
24 bytes
28 bytes
32 bytes
Length
4 bytes
8 bytes
12 bytes
48
description
digital input (slaves 0 - 7)
digital input (slaves 0 - 15)
digital input (slaves 0 - 23)
digital input (slaves 0 - 31)
digital input (slaves 0 - 7B)
digital input (slaves 0 - 15B)
digital input (slaves 0 - 23B)
digital input (slaves 0 - 31B)
description
digital output (slaves 0 - 7)
digital output (slaves 0 - 15)
digital output (slaves 0 - 23)
Tab. 10-13.
Tab. 10-14.