Scope - Xtralis HeiTel CamDisc HNVR Product Manual

HeiTel by Xtralis
1

Scope

This guide provides information on all features of CamDisc HNVR. A step-by-step walkthrough will acquaint
you with the transmission and recording features. All you need is CamDisc HNVR and a PC or laptop with
CamControl LITE or CamControl PRO software.
Version creation date
This guide describes CamDisc HNVR version 4.58. It was compiled in February 2017. As part of continuous
product development CamDisc HNVR firmware is in the process of perpetual enhancement. Refer to the
installation CD or our website www.heitel.com for the current firmware version.
Find information that could not be included in the guide at the time of printing in "Supplement" on page 65.
Supplementary Guides
Perform setup conveniently with CamControl LITE or CamControl PRO software. Please read the notes on
setup in the respective software guide. The description of offline hard disk evaluation by PC is included in
software guide CamControl PLAYER software. The software guides are available on the installation CD in
several languages and as a PDF file (online documentation).
In case you opted for an ISDN Card, PSTN Card, HYBRID Card 4 and/or a 19" Mount Kit please refer to the
information in the installation instructions for the module or the installation kit as well.
26419_04
CamDisc HNVR Product Guide
7