Xtralis HeiTel CamDisc HNVR Product Manual page 27

HeiTel by Xtralis
Please use CamControl PLAYER software for offline evaluation. Refer to the online guide of the same name
for more information.
Keyswitch
The Keyswitch is used to protect the hard disk against mechanical damage and unauthorised removal.
Note: To prevent damages on the hard disk drive please make sure that the CamDisc HNVR is switched
off, as soon as you remove the HDD.
Operation without removable hard disk
CamDisc HNVR can be operated without removable hard disk if the corresponding feature "Operation without
hard disk" has been activated with CamControl LITE or CamControl PRO software. In this operating mode
CamDisc HNVR offers all features, except video recording. Essentially these are the following features:
Digital transmission of live images by IP and/or dialup connection
l
Remote configuration and maintenance by IP and/or dialup connection
l
Alarm management - control inputs, motion detection - for automatic dialup
l
System and video signal monitoring
l
Camera and relay control
l
Analog video output with switch function
l
Audio transmission
l
All hard disk functions, such as cyclical reset, alarm on hard disk error, activation of logfile LED or the error
relay, and clock error display will be deactivated. This operating mode is available only if the device does not
detect any hard disk (and therefore no removable hard disk in the removable frame).
If CamDisc HNVR detects a functional hard disk after start up with option Use without hard disk drive
activated, the option will be ignored and the removable hard disk will be used. If the hard disk fails during
operation, all hard disk related errors will be read out until the next reset.
26419_04
CamDisc HNVR Product Guide
27