Xtralis HeiTel CamDisc HNVR Product Manual page 45

HeiTel by Xtralis
Logfile entry
[D&T], Login failed, The user indicated in field [u] tried to establish a
[u], [v], [w], [y] connection with log in order indicated in field [w]
to CamDisc HNVR (0=first, 1=second, etc.).
This attempt failed due to unknown user and/or
wrong password. Depending on connection mode
and configuration, the following additional
information can be displayed.
Field [v] = connection established by:
l
l
l
Field [y] = Connection cause:
l
l
l
Status messages to the 24 pin terminal block
[D&T], Control input The control input indicated in field [x] has been
[x] closed closed.
D&T], Control input The control input indicated in field [x] has been
[x] opened opened.
[D&T], control input The control input indication in field [x] has been
[x] sabotaged sabotaged.
[D&T], control input The control input indication in field [x] has been
[x] alarmed alarmed.
[D&T], control input The control input indication in field [x] has been
[x] secured secured.
[D&T], Alarm input The alarm input has been closed.
closed
[D&T], Alarm input The alarm input has been opened.
opened
[D&T], Alarm input The alarm input has been sabotaged.
sabotaged
[D&T], Alarm input The alarm input has been alarmed.
alarmed
[D&T], Alarm input The alarm input has been secured.
secured
[D&T], Alarm enable The arm/disarm input has been closed.
input closed
[D&T], Alarm enable The arm/disarm input has been opened.
input opened
[D&T], Alarm enable The arm/disarm input has been sabotaged.
input sabotaged
[D&T], Alarm enable The arm/disarm input has been alarmed.
input alarmed
26419_04
Description
IM = internal Modem (ISDN Card)
EM = external Modem (or other dial up
devices)
NET = Network
R = Receiver dialup
A = Alarm call triggered by CamDisc HNVR
S = Service call triggered by CamDisc
HNVR(every 24 hours)
CamDisc HNVR Product Guide
Optional Error relay
no no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
yes no
45