Xtralis HeiTel CamDisc HNVR Product Manual page 42

CamDisc HNVR Product Guide
Logfile entry
[D&T], Track, [x], Overwrite protection is activated, the percentile
reached warning warning threshold has been reached for a camera
threshold track [x].
[D&T], Hard disk Overwrite protection is activated and the storage
full, Track, [x] medium capacity for camera track [x] is depleted;
no more pictures can be recorded.
[D&T], Period of The minimum recording period for camera track
recording reached, [x] can no longer be maintained.
Track, [x]
[D&T], No video This message is written for detected video signal
signal on input, [x] errors for video input [x]
[D&T], HDD Read Storage medium read error. Field [x] indicates
Error, [x] hard disk model.
[D&T], HDD Write Storage medium write error. Field [x] indicates
Error, [x] model of storage medium.
[D&T], Hardware Indicates a serious hardware problem. Field [x]
error, [x] classifies the error. Text display is as follows:
l
l
l
l
l
l
The device requires repair.
[D&T], No secure The hard disks are configured specifically for
code, can't store operation with CamDisc HNVR by the
pictures manufacturer. The device cannot be operated
with standard hard disks.
[D&T], Temperature Critical temperatures of at least 70°C were
very high observed inside the device.
[D&T], Clock The clock could not be read at startup. The
adjusted firmware date of manufacture has been set. This
may indicate a faulty battery.
[D&T], The video decoder has been checked at startup.
Videodecoder [x] This message indicates a faulty video decoder at
error video input [x].
Connection messages
42
Description
Clock = Timer module
Clear Flash = Faulty flash memory
Write Flash = Faulty flash memory
DSP = Faulty DSP module
DSP-RAM = Faulty DSP memory
Shared memory = Faulty memory module
HeiTel by Xtralis
Optional Error relay
no yes
no yes
no yes
yes yes
no yes
no yes
no yes
no yes
no yes
no yes
no yes
26419_04