Xtralis HeiTel CamDisc HNVR Product Manual page 40

CamDisc HNVR Product Guide
Event triggered recording controlled by contacts
This mode triggers event recording by control input status changes. A normally closed contact produces a
positive edge upon opening (from low to high, Edge +) while a normally open contact produces a negative
edge (Edge –) upon closing.
Event triggered recording controlled by motion detection
This mode triggers event recording with integrated motion detection with adjustable sensitivity and definable
detection areas.
Figure 5-6: Event recording triggered by integrated motion detection
40
Figure 5-5: Event recording triggered by control input
HeiTel by Xtralis
26419_04