System Environment - Xtralis HeiTel CamDisc HNVR Product Manual

HeiTel by Xtralis
3.5

System Environment

3.5.1 Overview of Software for Operation, Alarm Verification, and
Configuration
CamDisc HNVR is a standalone unit. Once installed and configured, it reacts to events, records these on a
continuous or on an event-triggered basis, transmits video and/or audio data, alarms to local and remote
receiver units, and additionally logs protocols locally. Only one of the following software packets, developed
by HeiTel especially for CCTV applications, is required for the PC based receiver/evaluation unit.
CamControl LITE (part of CamDisc HNVR delivery) software for operation, alarm verification, and
l
configuration for single workstations with up to 6000 transmitters CamDisc HNVR, CamServer,
Cam4mobile, CamDisc, CamTel and/or CamLine. CamControl LITE software is used for setting up the
CamDisc HNVR.
CamControl PRO software for operating, alarm verification and configuration of single workstation
l
applications. Enables simultaneous viewing of up to 9 transmitters. Maximum 6000 transmitters
(CamDisc HNVR, CamServer, Cam4mobile, CamDisc, CamTel and/or CamLine.
CamControl PLAYER (included in CamDisc HNVR delivery) software for replay and evaluation of
l
CamDisc HNVR, Cam4mobile, CamDisc and PC archives, and integral part of CamControl LITE and
CamControl PRO. PC Kit CamDisc HNVR USB - external USB adapter - enables hard disk evaluation in
offline mode.
Note: Information on other software solutions, in particular for integration into higher-level control centres
such as HeiTel's Event Management System(EMS) or the video wall software CamControl MV, is
available on request.
3.5.2 Compatibility of Software Versions
Ensure compatibility of CamControl software with your CamDisc HNVR. The table below provides an
overview:
CamControl LITE
CamControl PRO
CamControl PLAYER
CamControl Android
CamControl MV
CamControl iPhone
CamControl Windows Phone
Event Management System
PC requirements
Please refer to the appropriate CamControl software guide or EMS software guide for PC hardware and
software requirements.
26419_04
Software
CamDisc HNVR Product Guide
Compatible from version
4.53
4.16
3.36
1.9
1.1.9
2.3.4
1.0
1.6.0
13