Xtralis HeiTel CamDisc HNVR Product Manual page 57

HeiTel by Xtralis
Camera position
authentication
Site Archive
Video settings
Archive passwords
HDD
POS/ATM/IBIS
Keywords
Adapter
Audio
Track settings
Video x in
Event triggered recording
26419_04
With installed HYBRID Card 4 and at least one activated analogue video
channel:
For all cameras:
Sensitivity=Low; Connect=not activated
For all cameras:
Conditional refresh:
On= activated
For analogue cameras (only when using the HYBRID Card):
Recording quality=720 * 288 +
No archive password entered
Commands:
None of the delete or formatting options is activated
For all cameras:
Recording=not activated; Type=POS; Track size (%)=10%;
Line length=57; Delete=not activated
Keyword=all without entry; All=all activated
Port=5000;
Connected POS/ATM Adapters are displayed where applicable
Audio recording:
On=not activated
Commands:
Delete audio track=not activated
Operating mode=Duplex;
Track division=identical partitioning of maximum storage capacity for all
camera tracks
For all video inputs:
All set to continuous recording;
Event recording always enabled=not activated;
Timer:
All set to continuous recording;
Overwrite protection= not activated;
Warning at=not activated (preset=90%);
Report period less than= not activated (preset=30 days);
Delete all pictures older than= not active (preset=30 days);
For analogue cameras (only when using the HYBRID Card):
Record preview images = not activated
For all video inputs:
Event trigger:
Trigger via contact=Normally opened;
Trigger via serial command=off;
Retrigger at=not activated (preset=75%);
only when using the HYBRID Card:
Trigger via motion detection=off;
Event size:
Desired number of events=5000;
Duration Prealarm (s)=5;
Interval Prealarm (s)=1; Duration Alarm (s)=15;
Interval Alarm (s)=0 (quickest possible)
CamDisc HNVR Product Guide
57