Table of Contents
Advertisement
DC step-by-step
• Supplied Power
• Gear Ratio
Full/Half wave pulsating current
• Frequency
• Supplied Power
• Gear Ratio
Full wave pulsating current
4.4.1 Default setting
This unit is set at factory for connection with the gyrocompass specifications tabulated
below. This is the default setting for DIP switches and jumper wires; all DIP switches off, all
jumper wire set for #1. If the gyrocompass' specifications are different, see the next section.
• Type
:
• Frequency
:
• Rotor Voltage :
• Stator Voltage :
• Gear Ratio
:
• Supplied Power:
:
(
) VDC
:
360x
180x
:
50/60 Hz
:
(
) VDC
:
360x
180x
V
AC synchro
50/60 Hz
Between 60 VAC and 135 VAC
Between 60 VAC and 135 VAC
360x
Between 30 VAC and 135 VAC
43
90x
36x
400 Hz 500 Hz
90x
36x
Half wave pulsating current
V
Advertisement
Table of Contents
Need help?
Do you have a question about the FELCOM 82A Series and is the answer not in the manual?
Questions and answers