Openvpn Tunnels Configuration - Advantech ER75s User Manual

Item
NAT Rules
Authenticate Mode
Pre-shared Secret
CA Certificate
DH Parameters
Local Certificate
Local Private Key
Username
Password
Extra Options
Table 38: OpenVPN tunnels configuration
Continued from previous page
Description
Applies NAT rules to the OpenVPN tunnel:
not applied – NAT rules are not applied to the OpenVPN
tunnel
applied – NAT rules are applied to the OpenVPN tunnel
Sets authentication mode:
none – no authentication is set
Pre-shared secret – sets the shared key for both sides of
the tunnel
Username/password – enables authentication using CA
Certificate, Username and Password
X.509 Certificate (multiclient) – enables X.509 authenti-
cation in multiclient mode
X.509 Certificate (client) – enables X.509 authentication
in client mode
X.509 Certificate (server) – enables X.509 authentication
in server mode
Authentication using pre-shared secret can be used for all offered
authentication mode.
Auth. using CA Certificate can be used for username/password
and X.509 Certificate modes.
Protocol for exchange key DH parameters can be used for X.509
Certificate authentication in server mode.
This authentication certificate can be used for X.509 Certificate
authentication mode.
It can be used for X.509 Certificate authentication mode.
Authentication using a login name and password authentication
can be used for username/password mode.
Authentication using a login name and password authentication
can be used for username/password mode.
Allows to define additional parameters of OpenVPN tunnel such
as DHCP options etc.
59
ER75s