4.8
OpenVPN
4.8.1
Tunnel
To access this page, click OpenVPN > Tunnel.
The following table describes the items in the previous figure.
Item
Status
Tunnel 1
Protocol
Port
Remote IP Address
Remote Subnet
Remote Subnet
Mask
Server Network
Server Netmask
Redirect Gateway
Local Interface IP
Address
EKI-122xR-CE Series User Manual
Figure 4.10 OpenVPN > Tunnel
Description
Display the current status of the tunnel.
Click the radio button to enable or disable the tunnel.
Click the drop-down menu to select the tunnel protocol: UDP, TCP
Server or TCP Client.
Enter a value to import or export certificate (CRL).
Enter a value to specify a remote IP address.
Enter a value to specify a remote subnet.
Enter a value to specify a remote subnet mask.
Enter a value to specify a server netmask.
Enter a value to specify a server network.
Check the box to initiate the redirect gateway feature. When redirect-
gateway is used, OpenVPN clients will route DNS queries through the
VPN, and the VPN server will need handle them.
Enter a value to specify a ping interval.
49