EKI-7526I 16 Port Unmanaged Industrial Ethernet Switch User Manual...
Page 2
The documentation and the software included with this product are copyrighted 2009 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
Page 3
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 4
Step 2. Contact your distributor, sales representative, or Advantech’s customer service center for technical support if you need additional assistance. Please have the following information ready before you call: - Product name and serial number...
Page 5
Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible.
Page 6
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. 1. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is 2.
Fail LED will turn on and send an alarm through a relay output for notifying user. 1.1.3 Flexible Mounting EKI-7526I is extremely compact (79 x 152 x 105 mm) and can be mounted on a DIN- rail or a panel, so it is suitable for any space-constrained environment. 1.1.4...
• Supports surge protection (EFT) 3,000 V for power line • Supports 4,000 V ESD protection for Ethernet • Supports +12 ~ 48 V power input • Provides flexible mounting: DIN-rail, Wall Mounting • Supports Wide range operating temperature from -40 ~ 75 ℃ (EKI-7526I) Chapter1...
1.4 Packing List • 1 x EKI-7526I 16 Port Unmanaged Industrial Ethernet Switch • 1 x eAutomation Industrial Communication CD-ROM with User manual • 2 x Wall Mounting Bracket and Screws • 1 x DIN-rail Mounting Bracket and Screws • 1 x EKI-7526I Startup Manual •...
2.1 LED Indicators There are few LEDs display the power status and network status located on the front panel of EKI-7526I, each of them has its own specific meaning as the table below. Table 2.1: EKI-7526I LED Definition Color...
The EKI-7526I supports two mounting methods: DIN-rail & Wall. 2.3.1 Wall mounting EKI-7526I can be wall-mounted by using the included mounting kit. Then, hang on the EKI-7526I to the nails on the wall. First, use the screws included in the package to combine the EKI-7526I and metal mounting kit.
The DIN-rail kit is screwed on the industrial switch when out of factory. If the DIN-rail kit is not screwed on the industrial switch, please screw the DIN-rail kit on the switch first. First, hang the EKI-7526I to the DIN-rail with angle of inclination. See figure 2.6. Figure 2.6: Installation to DIN-rail Step 1...
2.4 Network Connection The EKI-7526I has 16 x RJ-45 ports that support connection to 10 Mbps Ethernet, or 100 Mbps Fast Ethernet, and half or full duplex operation. EKI-7526I can be connected to other hubs or switches via a twisted-pair straight-through or crossover cable up to 100m long.
Chapter 3 Troubleshooting Power Input Verify that is using the right power cord/adapter 48 V , please don’t use the power adaptor with DC output voltage higher than 48V, or it will burn this converter down. Cable Select the proper UTP cable to construct user network. Please check that is using the right cable.
Appendix A Pin Assignment & Wiring It is suggested to adopt ELA/TIA as the wiring of the RJ-45. Figure A.1: RJ-45 Pin Assignment Figure A.2: EIA/TIA-568B Figure A.2: EIA/TIA-568A...