Reset; Router Reset; Description Of Reset And Restart Router - Advantech ER75s User Manual

5.6.7 Reset

It is important to distinguish between reset and reboot the router.
Action Router behavior
Reboot Turn off and then turn on router
Reset Restore default configuration and reboot
the router
After green LED starts to blink it is possible to restore initial settings of the router by press-
ing button RST on front panel. After pressing RST button it is restoration of default configura-
tion and reboot (green LED will be on). For pressing the RST button could be used a narrow
screwdriver.
We recommend to backup your router configuration (see chapter
browser), because after reset router set configuration to the initial state.
Table 7: Description of reset and restart router
Figure 15: Router reset
16
Invoking events
Disconnect and connect the power,
Press the Reboot button in the web
configuration
Press RST button
8 Configuration via web
ER75s