L2Tp Tunnel Configuration - Advantech ER75s User Manual

8.17 L2TP tunnel configuration
L2TP is an unencrypted protocol.
To enter the L2TP tunnels configuration, select the L2TP menu item. L2TP tunnel allows
protected connection by password of two networks LAN to the one which it looks like one
homogenous. The tunnels are active after selecting Create L2TP tunnel.
Item
Mode
Server IP Address
Client Start IP Address
Client End IP Address
Local IP Address
Remote IP Address
Remote Subnet
Remote Subnet Mask
Username
Password
The changes in settings will apply after pressing the Apply button.
Description
L2TP tunnel mode on the router side:
L2TP server – in the case of a server must be defined IP
address range offered by the server
L2TP client – in case of client must be defined the IP
address of the server
IP address of server
Start IP address in range, which is offered by server to clients
End IP address in range, which is offered by server to clients
IP address of the local side of the tunnel
IP address of the remote side of the tunnel
Address of the network behind the remote side of the tunnel
The mask of the network behind the remote side of the tunnel
Username for login to L2TP tunnel
Password for login to L2TP tunnel
Table 46: L2TP tunnel configuration
71
ER75s