Table of Contents
Advertisement
Getting to Know the KS070-BT
Top View
Antenna
hole
COM 4, COM 2, COM 1
Power Button with LED (Green)
Press to power on or power off the system.
Status LED (Blue)
Indicates system status.
Status LED
Suspend Mode
S0
LED Behavior
Off
Reset Button
Press to restart the system without going through a full shutdown and boot cycle.
HDMI Port
Connects to the HDMI port of a display.
USB 3.0 Port
Connects USB 3.0 devices as well as devices from previous versions such as USB
2.0 or USB 1.1.
COM Ports
COM 1, COM 2 and COM 4 can be an RS232, RS422 or RS485 port. COM 4 can be
used as an 8-bit Digital I/O or a serial port via jumper selection.
Wireless Antenna Holes
Reserved for installing wireless antennas.
Chapter 1 Introduction
Antenna
hole
USB 3.0
Power
HDMI
Reset/
Status LED
S1-S3 (sleep)
S4, S5
Blink
Off
Chapter 1
Bottom View
LAN 1 LAN 2
DC-in
DC-in
Plug a power adapter into this socket.
LAN Ports
Connect a network device or a LAN cable for network connectivity.
USB 2.0 Ports
Connect USB 2.0 or 1.1 devices.
Line-out
Connects a speaker.
Mic-in
Connects a microphone.
COM Port
Connects serial devices. COM 3 can be an RS232, RS422 or RS485 port.
8
Line-out
Mic-in
COM 3
USB 2.0
www.dfi.com
Advertisement
Table of Contents
