F3-Remote Control Ap And Up - Eaton CEAG DualGuard-S Mounting And Operating Instructions

32 F3-Remote Control AP and UP

32 F3-Remote Control AP and UP
The F3 remote display ensures that the most important
system functions are displayed even in the event of a
power failure. A key-operated switch can be used to block
emergency lighting during idle times. The F3 remote dis-
play thus fulfils the requirement that remote switching is
only permissible if actuation by unauthorised persons is not
possible. Blocking emergency operation does not affect
the battery conservation charge. A differential loop moni-
toring leads to the operational readiness of the system in
case of short circuit or wire break detection. LED displays:
System ready for operation, power source for safety pur-
poses, fault.
Connection of the F3 remote display AP to the ACU DG module
12
F3
22
32
S1
S2
+24V
-24V
Ordering details
Type
F3 Fernanzeige AP
F3 Fernanzeige UP
70
Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de
© 2017 Eaton. All Rights
ACU
Description
Remote display for surface mounting
Remote display for flush-mounted mounting
Reserved..
Order No.
40071338497
40071347490
GLT
FÜB