Eaton CEAG DualGuard-S Mounting And Operating Instructions page 55

Default settings Relay contacts
Name
Mains operation
Emergency operation (power failure
via 3-PM
Power failure via 3-PM-IO
Emergency lighting
Function test
Duration test
DualGuard-S blocked
Deep discharge protection
ACU DG Power supply failed
External buzzer On
Technical ventilation On
Charging fault
Circuit fault
Sum fault
Insulation faults
Prio 1 Error
Prio 2 error
Prio 3 Error
LED Service Pin
Ready for operation (green LED):
Safety power source (yellow LED):
Faults (red LED):
Scenario active (orange LED):
Service Pin:
Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de
Relay 1 Relay 2
X
X
Description
The device works without problems.
The emergency lighting and all internal and external modules are powered by the
battery.
The device function is disturbed.
An evacuation was triggered via the AE-CU controller.
To login and logout the ACU DG module.
Relay 3 Relay 4
X
X
20 ACU DG Modul
Transistor Transistor
output 1 output 2
55