Eaton CEAG DualGuard-S Mounting And Operating Instructions page 35

16.5. Table configure Luminaire setup (Login = Uninstructed specialist)
Ope- Icon
rating
steps
1
2
3
4
5
6
Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de
16.5. Table configure Luminaire setup (Login = Uninstructed specialist)
Function
Icon Menu
Icon Luminaire
setup
Icon SKU,s
There can be up
to 40 SKU or SOU
circuit modules
preceding it.
Icon luminaires
Up to 20 lumi-
naires can be
connected via
circuit to.
Icon General
Information can be
entered for each
luminaire.
The switching
mode can be
determined via the
icons switches 1
and 2.
The switching and
monitoring mode
can be determined
via the icons swit-
ches 1 and 2.
Each luminaire can
be assigned to two
switches.
Entries
Actuate
Actuate
Activate the circuit module icon to be
configured.
Press the light icon which should be
configured.
Enter name, information e.g. moun-
ting location and required tool, power
in W and VA, category and type:
Icon without CG-S = no monitoring,
Ready light icon= Only at power failu-
re switched on.
Permanent light icon= Permanently
on.
Icon Option Input=Light switches on
via the ACU inputs.
Icon GLT Switch=
Luminaire switches on via LON
switch.
Icons Timer= luminaire switches on
via programmed TimerFunction.
Icon IO/3PM-IO/TLS= Luminaire swit-
ches on via separate I/O modules.
35