Eaton CEAG DualGuard-S Mounting And Operating Instructions page 25

14 Check the fuses of the mains or battery power supply.
Assign/ Enter new Password
By pressing the icon you get to the Log In input.
Please pay attention to upper and lower case (Shift key).
Factory setting:
User name: Admin
Password: EATON
After entering, press key > OK <.
Then press any field.
If the EATON password entered at the factory is to be
retained, click on the „Retain password" icon. If a new
password is to be assigned, click on the „Change pass-
word" icon.
There is a warning message that if the password is lost,
the color touch display must be sent in and reset.
Then enter the current password under „Old password" ,
the new password under „New password" and repeat
under „Acknowledge password" . Then confirm the entry
by pressing the „Ok" key.
ATTENTION!
Please remember the new password as there is no
default password.
NOTE!
After three incorrect entries of the user name or pass-
word in the user group „Admin" , the user is locked for 10
minutes.
In all other user groups, the user is locked for 3 minutes
after three incorrect entries.
If no entry is made within 10 minutes the user is logged
out automatically.
25
Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de