Dualguard-S 28; Dualguard-S 20 - Eaton CEAG DualGuard-S Mounting And Operating Instructions

36 DualGuard-S 28

36 DualGuard-S 28
The DualGuard-S 28 in IP21 (IP31 optional) version with
individual cable entry in accordance with EN 50171 is sui-
table for supplying up to 88 circuits for safety and escape
sign luminaires 230V / 216V AC/DC in the power range up
to 17 .3KW. A configurable distribution board for mains and
battery enables the connection of 1- and 3-phase sub-distri-
butors of the type DualGuard US, DualGuard-S ESF30 and
DualGuard-S SOU. The wiring system with rounded moun-
ting panels does without classic cable ducts and, in combi-
nation with the natural ventilation and the large ventilation
slots of the mounted modules, ensures a homogeneous
control cabinet climate which has been proven by heating
tests in accordance with EN 61439-1 under nominal load
conditions. The clear, self-explanatory internal modular field
structure, taking contact protection into account, rounds off
the appearance.
The extensive catalogue of cabinet accessories such as
special locks, door hinges right/left, cable glands, bases in
various heights, IP31 retrofit kits and IP54 on request offers
the right solution for most customer-specific requirements
without long delivery times.
The colour touch display with automatic testing device and
individual luminaire monitoring with individual status and
name indication per luminaire in connection with system-
bound ECG / LED supply module including monitoring
module without additional data line reports and additio-
nally proclaims the operating status of the external phase
monitor modules, the insulation monitoring device as well
as the battery strands and, if battery block monitoring
technology is used, the operating status of each individual
battery block.
76
Mounting- and Operating Instruction CEAG DualGuard-S 40071860347 January 2020 www.ceag.de
1 2 3 4
A
B
C
D
E