NETGEAR ReadyDATA 5200 Software Manual page 90

The following figure shows the File and Folder section on the Properties pane of a share:
The following table explains the file and folder access settings:
Table 9. File and folder access settings
Item
Folder Owner
Folder Group
Folder Owner Rights
Folder Groups Rights
Folder EveryOne Rights Make a selection from the drop-down list:
ReadyDATA OS 1.2
Setting
You can assign a single user or the administrator as the folder owner. By default, the
folder owner is set to guest.
You can assign a single group, a single user, or the administrator as the folder group.
By default, the folder group is set to guest.
Make a selection from the drop-down list:
• Disabled. The folder owner does not have access rights to a folder.
• Read-Only. The folder owner has read-only access to a folder.
• Read/Write. The folder owner has read/write access to a folder. This is the
default setting.
Make a selection from the drop-down list:
• Disabled. Members of a group have no access to a folder that is owned by a
member of the group.
• Read-Only. Members of a group have read-only access to a folder that is owned
by a member of the group.
• Read/Write. Members of a group have read/write access to a folder that is
owned by a member of the group. This is the default setting.
• Disabled. No one outside the group in which a group member owns a folder has
access rights to the folder.
• Read-Only. Anyone outside the group in which a group member owns a folder
has read-only access to the folder.
• Read/Write. Anyone outside the group in which a group member owns a folder
has read/write access to the folder. This is the default setting.
Manage Shares and LUNs
90