NETGEAR ReadyDATA 5200 Software Manual page 57

Item Description
Router Enter the IPv6 address for the ReadyDATA 5200.
IPv6 Address Enter the prefix length for the ReadyDATA 5200. The default address
is ::1 (that is, 0::1).
Prefix Length Enter the IPv6 address for the router through which the ReadyDATA
5200 connects to your network. The default prefix length is 24.
Note: NETGEAR recommends that you use DHCP address reservation to
make sure that the DHCP server always assigns the same IP address to the
interfaces of the ReadyDATA 5200. The MAC addresses of the physical
interfaces and VNICs are shown on the Network screen.
10. Click the DNS tab.
The DNS settings display:
11. To add a DNS server, click the + button.
12. Enter an IP address.
13. Click Add.
14. (Optional) To add more DNS servers, repeat
You can configure multiple DNS servers.
ReadyDATA OS 1.2
Step 11
Configure the System Settings
57
through Step 13.
Manual
configuration
only