NETGEAR ReadyDATA 5200 Software Manual page 58

15. (Optional) To remove a DNS server, select the server, and click the - button.
16. Click Apply to save the settings on all three VNIC panes.
Note: If you change the IP address of the ReadyDATA 5200, your browser
loses its connection to Dashboard. To reconnect to the ReadyDATA
5200, launch the RAIDar utility, click the Rescan button to locate the
device, and click the Setup button to reconnect.

To remove a VNIC:
1. Select Network.
The Network screen displays:
2. Click the gear icon to the right of the VNIC that you want to remove.
A pop-up menu displays:
3. Select Remove.
4. Confirm the removal.
ReadyDATA OS 1.2
Configure the System Settings
58