NETGEAR ReadyDATA 5200 Software Manual page 2

Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use it to register your product
at https://my.netgear.com. You must register your product before you can use NETGEAR telephone support.
NETGEAR recommends registering your product through the NETGEAR web site. For product updates and web
support, visit http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR.
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/general/contact/default.aspx.
NETGEAR recommends that you use only the official NETGEAR support resources.
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of
NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change
without notice. Other brand and product names are registered trademarks or trademarks of their respective
holders. © NETGEAR, Inc. All rights reserved.
Revision History
Publication Version
Part Number
202-11025-06 OS 1.2
202-11025-05 OS 1.1
202-11025-04 OS 1.1
202-11025-03 OS 1.1
ReadyDATA OS 1.2
Publish Month Comments
March 2013 • Updated information about File and Folder permissions.
(See
page 89.)
• Added information about Smart Snapshot Management
for shares and LUNs. (See
on page 168.)
• Changed name of 'lock period' icon to 'zoom' icon and
updated description. For an example of how to use this
icon, see
December 2012 • Revised information about cloned shares and LUNs. (See
Manage Snapshots for Shares and LUNs
November 2012 • Moved the chapter about managing disks and volumes
ahead of the chapter about configuring the system,
network, and global file-sharing protocol settings.
September 2012 • Revised
• Added
• Revised multiple screens to remove the Language menu
that is now included in the Profile menu.
• Removed information about setting up share quotas for
users and groups. This information might be added back
for a later release.
• Where applicable, added a note to explain that without at
least one volume, changes are not saved after you reload
the ReadyDATA 5200.
2
Configure the File and Folder Access Settings
Smart Snapshot Management
Roll Back to a Snapshot
Supported Browsers.
Optional Uninterruptible Power
on
on page 162.
on page 158.)
Supplies.