NETGEAR ReadyDATA 5200 Software Manual page 86

• Read/Write. The selected user or group is permitted to read, edit, create, and delete
files on the share.
Note: If the ReadyDATA 5200 uses the local database, you can select the
default group Everyone and set read-only or read/write access for everyone.
3. (Optional for SMB and AFP). Allow anonymous access to the share.
If the ReadyDATA 5200 uses the local database and you have granted the default group
Everyone access, you can select the Anonymous check box to allow anonymous access
to the share. In this situation, users are not required to provide access credentials.
Host Settings
For SMB, NFS, and FTP, you can configure access rights for users on hosts. The access
rights that you configure for one host apply to all users on the host. For NFS, you can also
configure the access rights that apply to any host, and, for individual hosts, you can configure
whether root access is granted. Host settings do not apply to AFP.
If the table contains many hosts, use the search field on the right to search for a particular
host.

To add a host and configure host access settings:
1. To add the IP address of a host from which access can be granted, click the + button
( ).
The Add Host pop-up screen displays.
2. Enter the host IP address in the IP address field.
3. Click Add.
The host is added to the table.
Note: For NFS only, you can set access rights for AnyHost, which is a default
entry in the host table. You cannot grant root access to AnyHost.
4. For each host to which you want to grant access to the share, select one of the following
check boxes:
• Read Only. The users on the selected host are permitted to read only files on the
share.
• Read/Write. The users on the selected host are permitted to read, edit, create, and
delete files on the share.
5. (Optional for NFS) For each host for which you want to grant the users root access, select
the Root Access check box.
ReadyDATA OS 1.2
Manage Shares and LUNs
86