Configure The Network Access Settings - NETGEAR ReadyDATA 5200 Software Manual

6. Configure the access settings for the selected protocol as explained in the following sections
(not all sections apply to all protocols):
•

Configure the Network Access Settings

• Configure the Advanced Access Settings
• Configure the File and Folder Access Settings
7. Set the On-Off switch for the selected protocol:
• To apply the access settings, click the On-Off switch so the switch shows the On
position.
• To save the configured access settings but prevent them from taking effect, click the
On-Off switch so the switch shows the Off position.
Note: The settings take effect immediately (that is, no Apply button exists to
confirm the changes).
Configure the Network Access Settings
The user and group access settings let you set access rights to an individual share for groups
and users. The host access settings let you set access rights to an individual share for users
on a host.
The table in the Network section displays either the groups and users that you defined in the
local database or the ones that are downloaded from the Active Directory server. For
information about the local database and an Active Directory connection, see
Manage User Groups and User
ReadyDATA OS 1.2
on page 84
on page 87
Accounts.
Manage Shares and LUNs
84
on page 89
Chapter 5,