Appendix A Factory Default Settings - NETGEAR ReadyDATA 5200 Software Manual

Factory Default Settings
A.
This appendix provides the factory default settings of the ReadyDATA 5200.
To reset all settings to their factory defaults, use the procedure that is explained in
Firmware to Factory Defaults
ReadyDATA 5200 s explained in the ReadyDATA 5200 Hardware Manual. The ReadyDATA
5200 returns to the factory configuration settings that are shown in the following table:
Table 11. ReadyDATA 5200 factory default settings
Item
System settings
Device Time
Services
Language
on page 139, or press the Reset button on the front panel of the
Default Setting
GMT -08:00 Pacific Time (US & Canada); Tijuana
SMB Globally enabled
AFP Globally enabled
NFS Globally disabled
FTP Globally disabled
SNMP Globally disabled
SSH Globally disabled
iSCSI Globally enabled (nonconfigurable)
Replicate Globally disabled
English
194
A
Reset the
Port number 21
Authentication mode Anonymous
Allow upload resumes Disabled
Passive ports 32768–65535
Masquerade address Disabled
Community Public
Trap destination Blank
Hosts allowed access Blank
User name Blank
Password Blank