NETGEAR ReadyDATA 5200 Software Manual page 50

.
Figure 4.
These are the default network settings before any configuration has occurred:
Table 5. Default network settings
Item Default Setting
Physical Ethernet interface (eth1 and eth2)
MTU 1500
Speed (Mbps) 1000
Duplex Full
Bonding None
VNIC One attached to each interface (for example, vnic0 to eth0 and vnic1 to eth1)
Virtual NICs (vnic0 and vnic1)
MTU 1500
VLAN ID 0
Bandwidth limit None
TCP/IP IPv4 with DHCP enabled, and IPv6 disabled
DNS No server
ReadyDATA OS 1.2
Configure the System Settings
50