NETGEAR ReadyDATA 5200 Software Manual page 108

The LUN Group Properties pop-up screen displays (the following figure shows
examples):
4. Configure the properties as explained in the following table:
Item Description
Name The name is provided for information only and cannot be changed.
Target The target is the address that an iSCSI client (that is, an initiator) needs to access the
LUN group. The Target field is automatically populated, but you can delete the content
by clicking the cross at the right of the field and then replace the content with a custom
target address.
Require initiators to identify
themselves using CHAP
ReadyDATA OS 1.2
By default, access to the LUN group is open to the
initiators that you add to the table onscreen. Select this
check box to enable CHAP authentication, and to allow
only authenticated initiators access to the LUN group.
Manage Shares and LUNs
108