NETGEAR ReadyDATA 5200 Software Manual page 12

BY default, the virtual NICs (VNICs) of the ReadyDATA 5200 are DHCP enabled for IPv4,
and the RAIDar utility should be able to discover the ReadyDATA 5200.
Note: The ReadyDATA 5200 requires a DHCP server for initial discovery.
If the ReadyDATA 5200 is not detected, check the following and click Rescan to try
again:
• Make sure the ReadyDATA 5200 is turned on and is connected to your network.
• Make sure the client computer that is running RAIDar is on the same subnet as the
ReadyDATA 5200.
• If you are running RAIDar on Windows XP before SP2, disable the Internet
connection firewall.
3. Highlight the ReadyDATA 5200 and click the Setup button.
RAIDar opens your default browser and prompts you to log in to the ReadyDATA 5200.
4. Log in to the ReadyDATA 5200 using the default login credentials:
• As the default user name, enter admin (case-sensitive).
• As the default password, enter password (case-sensitive).
ReadyDATA OS 1.2
Getting Started
12