NETGEAR ReadyDATA 5200 Software Manual page 85

The following figure shows the Network section on the Properties pane of a share (in this
example, the SMB protocol is shown):
Figure 7. Network section of the share properties pane (SMB)
User and Group Settings
For SMB, AFP, and FTP, you can configure access rights for groups and individual users.
User and group settings do not apply to NFS.

To configure user and group access settings:
1. From the All drop-down list, make one of the following selections to specify the
information that you want to display onscreen:
• All. The default group Everyone and all groups that you configured on the Security
screen or that were downloaded from the AD server are displayed. This is the default
setting.
• Users. Only the individual users that you configured on the Security screen or that
were downloaded from the AD server are displayed.
• Groups. Only the groups that you configured on the Security screen or that were
downloaded from the AD server are displayed.
To search for a particular user or group, use the search field on the right.
To update the user and group information, click the Refresh button (
2. For each group and individual user to which you want to grant access to the share, select
one of the following check boxes:
• Read Only. The selected user or group is permitted to only read files on the share.
ReadyDATA OS 1.2
Manage Shares and LUNs
85
).