NETGEAR ReadyDATA 5200 Software Manual page 137

If you enabled email alerts, the ReadyDATA 5200 sends a message when the firmware
update finishes.
5. (Optional) Verify that the ReadyDATA 5200 runs the new firmware.
Select System > Overview > Hardware. The Dashboard home screen displays.
Check which firmware version is listed in the Firmware field.
Update Firmware Locally
If the ReadyDATA 5200 is installed at a location that does not have Internet access, you need
to update your firmware locally.

To update firmware locally:
1. Using a computer that has Internet access, download the latest firmware for the
ReadyDATA 5200 from
computer.
2. Connect the USB drive with the updated firmware file to your ReadyDATA 5200.
For more information about the USB ports on the ReadyDATA 5200, see the ReadyDATA
5200 Hardware Manual.
3. Select System > Settings > Update.
The following figure shows the Settings screen with the firmware options:
ReadyDATA OS 1.2
http://readynas.com/downloads
System Maintenance and Monitoring
137
to a USB drive or connected