NETGEAR ReadyDATA 5200 Software Manual page 187

Readydata os 1.2
Hide thumbs Also See for ReadyDATA 5200:
Table of Contents

Advertisement

Item
Deduplication
Explicit Destination IP
Address
7.
At the bottom right of the screen, click Next.
The third and final Continuous Replicate screen displays:
ReadyDATA OS 1.2
Description
Select the check box to enable deduplication during the data transfer.
Deduplication prevents transfer of redundant data and increases the speed of the
data transfer.
Note:
After the data has been transferred, the data is not stored in a deduplicated
format unless it was already deduplicated on the source share or LUN.
ReadyDATA Replicate automatically selects the physical Ethernet interfaces and
VNICs for communication between the source and destination systems. If you
want to use a specific interface on the destination system, you need to specify its
IP address.
To specify a specific interface, select the check box to enable an explicit
destination IP address. Then configure the IP address.
Note:
You need to set up port forwarding if the source and destination are behind
a firewall.
Note:
If you use an explicit destination IP address, data that is replicated over the
Internet is not automatically encrypted. You need to select the Encryption check
box to enable encryption.
IP Address
Enter the IP address of the interface on the destination
system. The address is automatically appended with port
number 6819.
Backup, Replication, and Recovery
187

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ReadyDATA 5200 and is the answer not in the manual?

Table of Contents