Record DFA127 Instructions Manual page 74

→ Contrast BDE 2
→ Brightness BDE 1
→ Brightness BDE 2
→ Light time
LOCKING
→ Locking function
→ Normally locked
→ Always locked
→ Locking type
→ Standard
→ Bolts
→ Magnet
→ Pulse
102-127108955
20 Contrast of the display screen for 2nd BDE-D.
20 Brightness of backlight for 1st BDE-D.
0 = pale backlight for application with dull ambient light
40 = intense backlight for applications with bright ambient light
20 Brightness of backlight for 2nd BDE-D.
10 Duration of background lighting.
0 = no background lighting.
1..39 = time in seconds after pressing a button
40 = permanent background lighting
This parameter defines in which operating modes a door
should be locked.
X Locking is only possible in operating mode
door can be opened with SSK.
The door can be locked in the operating modes.
'One-Way'
AKA (
'Locked'
(
NOTICE
If no BDE-D is connected and the DFA 127 is controlling an electric door opener,
'Always locked' must be set as the parameter.
Selection of the connected locking device. Due to the large
range of variants, the locking type cannot be identified auto-
matically.
X For standard electric door openers (e.g. effeff). The drive pres-
ses briefly, so that the lock can unlock. It is activated until the
door is open.
Suitable for a motor lock. The drive presses briefly, so that the
lock can unlock. Remains enabled until the door is closed
again.
Function as bolts, without pushing.
The drive presses briefly, so that the lock can unlock. It is acti-
vated until the door is open by 10°.
'Automatic'
and
'Automatic' 'Automatic'
), AKI (
'One-Way'
, and
V1.1
Configurations
'Locked'
. A locked door can be opened with
'One-Way'
and
'Automatic'
).
16
. A locked
'Locked'
,
) or SSK
74/ 102