Reset-Button; Statusanzeige - Record DFA127 Instructions Manual

BDE2 (S2)
The BDE-D indicates the current operating mode.
If an operating mode that has no current priority is set on the BDE-D, status message 62 is
displayed.
15.2

Reset-Button

If this button is pressed for at least 5 sec. a reset of the control unit is carried out. After the
reset, the status display LED lights up permanently.
15.3

Statusanzeige

▪ Remeins off if no fault is present
▪ Blinks if a fault is present (see chapter
▪ Lights up continuously during a reset
102-127108955
Mechanical BDI (toggle switch)
L
H
L
Mech. control elements and indication
BDE1 (S1)
H Continuously open
L
L
Status and fault signals BDE-D
V1.1
Electronic BDE-D
Function Priority (1=highest)
Locked
One-Way
Manual
Automatic
15
1
2
3
4
5
)
59/ 102