Record DFA127 Instructions Manual page 71

→ When locked
→ Disabled
→ Active
→ When Automatic
→ Disabled
→ Active
→ Collision
→ Disabled
→ Active
→ Assisted closure
→ Disabled
→ Constant
→ Increasing
→ Door stop
→ Slow, increasing
→ Slow, Door stop
102-127108955
The parameter defines how the door is to react in the operat-
'Locked'
ing mode
X The door closes with motor drive and programmed closing
speed.
In the locked operating mode, the door can be opened manu-
ally. The closure is then carried by spring tension (night
watchman).
The parameter defines how the door is to react in the operat-
'Automatic'
ing mode
X The door closes with motor drive and programmed closing
speed.
In the automatic operating mode, the door can be opened ma-
nually. The closure is then carried out by spring tension.
Activated: If the door leaf stands still for more than 1 s during
closure, motor-driven re-opening follows. Effective only when
motorised opening is allowed, e.g.
X The door stops when hitting an obstacle during closing.
If the door leaf stands still for more than 1 s during closure,
motor-driven re-opening follows.
▪ Effective only when motorised opening is allowed,
Manual/Active sensors
e.g.
This parameter determines the behaviour of the drive when
closing in 'Manual mode' shortly before complete closure.
▪ Support for wind load, over- and under pressure,
electric door openers and heavily dimensioned door
seals.
X The door closes with motor drive and programmed closing
speed.
Constant: unchanging power-assisted closing force for the final
10°.
Increasing, power-assisted closing force, if the closure is inhib-
ited within the last 10 °.
Rapidly-increasing, power-assisted closing force for the last 2°.
Slow closing with increasing, power-assisted closing force, if
the closure is inhibited within the last 10°.
Slow closing with rapidly-increasing, power-assisted closing
force for the last 2°.
V1.1
Configurations
.
.
Manual/Active sensors
.
16
.
71/ 102