Sending A Scanned Image To A Destination - Xerox WorkCentre 3335 User Manual

Sending a Scanned Image to a Destination

Before scanning to a destination, configure the destination folders on the server or share the folder on
a personal computer. In addition, you must have at least one Scan To Destination in the address
book. If Scan To Destination properties are not properly configured, the Scan To icon appears grayed
out on the touch screen.
To scan an image and send it to a destination:
1. Load the original document on the document glass or in the document feeder.
2. Touch Scan To→Scan Contacts.
3. Select an option.
4. Select the desired name from the list, then touch OK.
5. Change scan settings as needed.
6. Press the green Start button.
For details, refer to Adjusting Scanning Settings.
Xerox ® WorkCentre ® 3335/3345 Multifunction Printer
Scanning
113
User Guide