Selecting A Location For The Printer - Xerox WorkCentre 3335 User Manual

Selecting a Location for the Printer

• Select a dust-free area with temperatures from 10–30° C (50–90° F), and relative humidity 20–
80%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a
cold room can cause condensation inside the printer, directly interfering with image
transfer.
• Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of
the printer. The printer must be horizontal with all four feet in solid contact with the surface. To
find the weight for your printer configuration, refer to
• Select a location with adequate clearance to access supplies and to provide proper ventilation. To
find the clearance requirements for your printer, refer to
Configuration.
• After positioning the printer, you are ready to connect it to the power source and computer or
network.
Physical
Clearance Requirements for Standard
Xerox ® WorkCentre ® 3335/3345 Multifunction Printer
Installation and Setup
Specifications.
User Guide
37