Power Consumption - Xerox WorkCentre 3335 User Manual

Regulatory Information
Some Xerox models below these speed bands may also be enabled with 2-sided printing settings
defaulted on at the time of install. Continuing to use the duplex function will reduce the
environmental impact of your work. However, should you require simplex/1-sided printing, you may
change the print settings in the print driver.
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight
paper (60 g/m²), which contains less raw material and thus save resources per print, may be used in
certain applications. We encourage you to check if this is suitable for your printing needs.
ENERGY STAR (European Union Information)
The ENERGY STAR program is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to reduce environmental impact. Details on the ENERGY STAR
program and models qualified to ENERGY STAR can be found at the following website:
energystar.gov/find_a_product
Power Consumption and Activation Time
The amount of electricity a product consumes depends on the way the device is used. This product is
designed and configured to enable you to reduce your electricity costs. After the last print, the device
switches to Ready mode. In this mode, the device can print again immediately. If the product is not
used for a period of time, the device switches to a Power Saver mode. In these modes, to enable
reduced product power consumption, only essential functions remain active.
The product takes slightly longer to produce the first print after it exits Power Saver mode than it
takes in Ready mode. This delay is the result of the system waking up from Power Saver mode and is
typical of most imaging products on the market.
You can set a longer activation time or completely deactivate the Power Saver mode. This device can
take longer to switch to a lower energy level.
To learn more about Xerox participation in sustainability initiatives, go to:
xerox/environment/enus.html
Environmental Choice Certified to Office Machines CCD-035
218 Xerox ® WorkCentre
User Guide
.
This product is certified to Environmental Choice standard for office
machines, meeting all requirements for reduced environmental impact.
As part of achieving certification, Xerox Corporation has proven this
product meets the Environmental Choice criteria for energy efficiency.
Certified copier, printer, multifunctional device, and fax products must
also meet criteria such as reduced chemical emissions and demonstrate
compatibility with recycled supplies. Environmental Choice was
established in 1988 to help consumers find products and services with
reduced environmental impacts. Environmental Choice is a voluntary,
multi-attribute, and lifecycle-based environmental certification. This
certification indicates that a product has undergone rigorous scientific
testing, exhaustive auditing, or both, to prove its compliance with
stringent, third-party, environmental performance standards.
® 3335/3345 Multifunction Printer
www.
www.xerox.com/about-