User Guide - Xerox WorkCentre 3335 User Manual

Symptom
Auger marks appear on the printed output.
The output print is wrinkled or stained.
Envelopes are wrinkled or creased when printed.
Solutions
• Replace the Drum Cartridge.
• To check the toner level, check the control panel,
use the print driver, or Xerox
Internet ®
empty, replace it.
• Verify that the toner cartridge is approved for use
in this printer, and replace it as needed. For best
results, use a genuine Xerox
• Replace the Drum Cartridge.
• Verify that the paper is the correct size, type, and
weight for the printer and that it is loaded
properly. If not, change the paper.
• Try a new ream of paper.
• Change the Paper Type settings in the print driver.
• In the print driver, open the Printing Preferences
menu, select the Paper/Output tab, then change
the Paper Type setting.
• Verify that envelopes are loaded properly in the
bypass tray.
• Follow the guidelines for printing on envelopes.
For details, refer to
Envelopes.
Xerox ® WorkCentre ® 3335/3345 Multifunction Printer
Troubleshooting
CentreWare
®
Services. If the toner cartridge is almost
toner cartridge.
®
Guidelines for Printing

User Guide

®
191