Download Print this page

Code; Units; Brightness - Miele WCI 860 Operating Instructions Manual

Hide thumbs

Advertisement

Code

The PIN code prevents the washing
machine being used without your
knowledge.
Selection
Activate
If you activate the PIN code, you
have to enter a PIN code after
switching the washing machine on.
Otherwise it cannot be operated.
The factory default PIN code is 125.
Change
If wished, you can set a different
three-digit PIN code.
Do not forget the code you have
set.
If you forget the code, only Miele
Technical Service can unlock the
washing machine.
Make a note of your new code.
Deactivate
The washing machine is to be oper-
ated again without entering a PIN
code. This only appears if the PIN
code had been activated previously.

Units

The temperature can be displayed as
degrees °C/Celsius or °F/Fahrenheit.
The factory default is °C/Celsius.

Brightness

You can set the brightness of the dis-
play, the sensor controls and the
dimmed sensor controls.
Selection
Display
Controls the brightness of the dis-
play.
–        (dark)
–        (light) (factory default)
Buttons active
Controls the brightness of the activ-
ated sensor controls.
–        (dark)
–        (factory default)
–        (light)
Buttons inactive
Controls the brightness of the sensor
controls that can be activated.
–        (dark)
–        (factory default)
–        (light)
Tip: Ensure that there is a discernible
difference in brightness between the
activated and dimmed sensor controls.
A big difference in brightness makes it
easier to operate the appliance.
Settings
101

Hide quick links:

Advertisement

loading