Supervisor Level; Opening The Supervisor Level; Code-Based Access; Changing The Code - Miele PWM 514 Operating And Installation Instructions

Supervisor level

52

Opening the Supervisor level

Switch on the washing machine.


 
Programs Favorites
Help
Touch the Supervisor

The display will change to the

Code-based access

The supervisor level is accessed using a code.
The code is 000 (factory default).
After entering the code, you will be in the supervisor level. The indi-
vidual setting options are described in the following sections.

Changing the code

You can alter the supervisor level access code to protect the wash-
ing machine from unauthorized access.
Please inform Miele Customer Service if you have forgotten your
new code. Customer Service will have to reset the code.
Make a note of your new code and store it in a safe place.

Closing the Settings menu

Touch the  symbol.

The display will then go back to the previous menu level.
Touch the  symbol.

The display will change to the main menu.
11:02

Supervisor
 sensor control.
Supervisor level
menu.