Supervisor Level; Opening The Supervisor Level; Opening The Supervisor Level (Self-Service); Code-Based Access - Miele PWM 514 Operating And Installation Instructions

Opening the Supervisor level

Switch on the washing machine.


 
Programmes Favourites
Help
Touch the
Supervisor

The display will change to the

Opening the Supervisor level (self-service)

Switch on the washing machine and open the door.

Touch the Start/Stop sensor control and hold it down whilst carry-

ing out steps –.
Close the washing machine door.

The Start/Stop sensor control will now be flashing quickly; wait until

it lights up constantly.
Release the Start/Stop sensor control when the Start/Stop sensor

control lights up constantly.

Code-based access

The supervisor level is accessed using a code.
The code is 000 (factory default).
After entering the code, you will be in the supervisor level. The indi-
vidual setting options are described in the following sections.

Changing the code

You can alter the supervisor level access code to protect the washing
machine from unauthorised access.
Please inform the Miele Customer Service Department if you have
forgotten your new code. The Customer Service Department will
have to reset the code.
Make a note of your new code and store it in a safe place.

Closing the Settings menu

Touch the  symbol.

The display will then go back to the previous menu level.
Touch the  symbol.

The display will change to the main menu.
11:02

Supervisor
 sensor control.

Supervisor level

Supervisor level
menu.
53